Grade Brief:
P20 is an alloy tool steel with good machining ability even when hardened and tempered (Brinell 300). This steel has a polished surface and is one of the most regularly used requirements for machine cut plastic molds and casting dies. P20 is frequently hardened and tempered, ready for machining. It provides great wear resistance in this form, however if maximal surface hardness is required for compression molding plastic dies or similar equipment, the steel can be case hardened. A higher Sulfur variant, P20S, is offered for improved machinability.
Consult our Gurugram office for further assistance.
Meanwhile for more on Virat Special Steels;
Email Us: info@viratsteels.com.
Contact them by mobile numbers 98140 – 21775, 99991 – 24971 to 79.
Mode of Supply
Virat Special Steels is the largest stockiest and supplier of P20 Steel in flat, square and round bar. We provide steel in all sizes as your requirements. P20 die steel is available in flat, square and round shape. Consult our team who will assist you for P20 steel query.
Steel Properties
P20 / DIN 2311 /AISI P20 is the Pre Hardened Plastic mould steel hardness distributed evenly in large cross sections that have
excellent weldability with least hardness elevation, good mirror polishability and less streak texture making
finishing easier. Size Section availability upto 255mm thickness. Supply hardness is 240-280 BHN.
Mechanical Properties:
Tensile Strength | 965-1030 MPa |
Yield Strength | 827-862 MPa |
Hardness | 30 HRC |
Elongation | 20% |
Compressive Strength | 862 MPa |
Elastic Modulus | 190-210 GPa |
Physical Properties
Coefficient of thermal expansionat °C | 20-100 | 20-150 | 20-200 | 20-250 | 20-300 | 20-350 | 20-400 | 20-450 | 20-500 |
10-6 m/(m*K) | 12.7 | 12.8 | 13.1 | 13.3 | 13.6 | 13.7 | 13.8 | 14.0 | 14.3 |
Thermal Conductivity at °C | 23 | 150 | 300 | 350 | 400 | 500 |
W/(m*K) | 32.0 | 32.8 | 31.4 | 30.2 | 29.6 | 27.5 |
Heat Treatment & Processes:
Heat Treatment
During the carburizing process, P20 / DIN 2311 / AISI P20 tool steels are heated to 871-899°C (1600-1650°F) in the carburizing medium. After carburizing, these steels are heated to 816-871°C (1500-1600°F) to harden, then held for 15 minutes before being oil quenched.
Hardening:
Heat the steel consistently to 820-840°C until completely heated. Soak in oil to cool.
Forging:
Heat gently, giving the steel enough time to heat all the way through. start forging at 1050 degrees. Never forge below 930°C, reheating as needed. After forging, allow it to progressively cool.
Stress Relieving:
To reduce machining stresses when dies are substantially machined, stabilizing is advised right before finishing machining. 460° to 500° Celsius. Good soaking followed by air cooling is advised.
Normalizing:
Heating uniformly to 900°C for P20 / DIN 2311 / AISI P20 steel.
Annealing:
Heating consistently to 770–790°C for P20 / DIN 2311 / AISI P20 annealing. Good soaking, gentle cooling in the boiler.
Tempering:
Heat evenly and soak for at least one hour for every 25mm of section at the tempering temperature. Allow it to cool in a cool air.
Welding:
P20 / DIN 2311 / AISI P20 tool steels are welded using traditional techniques.
Soft annealing °C | Cooling | Hardness HB |
---|---|---|
710 – 740 | Furnace | max. 235 |
Hardening °C | Quenching | Hardness after quenching HRC |
---|---|---|
850 – 880 | Oil or saltbath, 180 – 220 °C |
52 |
Tempering °C after Quenching | 100 | 200 | 300 | 400 | 500 | 600 | 700 |
HRC | 52 | 50.5 | 48.5 | 46 | 42 | 36.5 | 28 |
Application
Plastic mould steel equivalent to P20/ DIN 2311 / AISI P20 use for die holders, zinc die, casting dies, backers, bolsters,
injection moulds, mould frames for plastic moulds, Shoe Blocks, pressure casting moulds, recipient sleeves
Etc.
Addition to other Grades:
HCHCR-D2 Steel , HCHCR-D3 Steel , P20+Ni Steel , P20 Steel , DB6 Steel , H13 Steel, H11 Steel, H21 Steel, H10 Steel, H12 Steel, M2 Steel, M35 Steel, M42 Steel, T1 Steel, DIN 2379 Steel, DIN 2080 Steel, DIN 2738 Steel, DIN 2311 Steel, DIN 2714 Steel, DIN 2344 Steel , DIN 2343 Steel, DIN 2581 Steel, DIN 2365 Steel, DIN 2606 Steel, DIN 3343 Steel, DIN 3243 Steel, DIN 3247 Steel, DIN 3355 Steel AISI D2 Steel, AISI D3 Steel, AISI P20+Ni Steel, AISI P20 Steel, AISI L6 Steel , AISI H13 Steel, AISI H11 Steel, AISI H21 Steel, AISI H10 Steel, AISI H12 Steel, AISI M2 Steel, AISI M35 Steel, AISI M42 Steel , AISI T1 Steel
Our Global Presence:
India, Nepal, Dubai, Thailand, Vietnam, Saudi Arabia, United Arab Emirates , Qatar, Kuwait, Iran, Turkey, Portugal, Spain, Poland, UK, USA, Canada, Brazil, Mexico, Belarus, Australia, New Zealand and many more..
We Provide our Special Steels in All Major Cities India.
Agra, Alwar,Ambala, Anand, Bhiwadi, Dehradun, Ghaziabad, Haridwar, Rudrapur, Delhi, Faridabad, Kanpur, Noida, Gurgaon, Manesar, Kundali , Chandigarh, Waluj , Vadodara, Pimpri – Chinchwad, Rajkot, Jaipur, Ahmedabad, Pithampur, Surat, Amravati, Vadodara, Indore, Bhopal, Ranchi, Jamshedpur, Howrah, Kolkata, Pune, Thane, Nashik, Mumbai, Navi Mumbai, Nagpur, Ambattur, Bangalore, Belgaum, Chittoor, Dindigul, Hyderabad, Ernakulam, Chennai, Secunderabad, Visakhapatnam, Coimbatore, Mysore, Nellore, Kochi, Thiruvananthapuram, Trivandrum, Vijayawada, Guntur, Tirupati, Nazarathpet, Kakinada, Kurnool and many more..